h22a7 knocking... whats it worth??

Post by **JEBB4** » Fri Jan 30, 2015 11:26 am

So my mate has offered me an accord h22a7 but he says it has a slight knock on the bottom end..

he doesn't really know how much to ask and im not too sure so thought id get you guys thoughts. .

I would be rebuilding it fully and upgrading bits to then swap it into my bb4 in future. .

what ya think guys??

All imput welcome and appreciate d

cheers

Post by **NafemanNathan** » Fri Jan 30, 2015 11:38 am

Well the heads go for anywhere between £150 and £250 these days.

And a block that needs rebuilding... I bought a bare H22a7 block (No crank, rods or pistons) for £40 on ebay the other day.

Plus £200 for the crank, rods and pistons if you bought them individually, so he'd be looking at £400ish if he was to break it.

Where as you can pick up a complete running a7 for £450.

So a complete a7 in need of a rebuild, sold to a good mate... £250 absolute tops! More like £200, or £300 to anyone else.

Post by **4thgenphil** » Fri Jan 30, 2015 12:35 pm

If only I had a spare rank and rods

Post by **NafemanNathan** » Fri Jan 30, 2015 12:43 pm

I'm sure you've got a rank rod in your pants!

Post by **4thgenphil** » Fri Jan 30, 2015 1:31 pm

NafemanNathan wrote:I'm sure you've got a rank rod in your pants!

Not to dissimilar to the one deep deep inside of you!

Post by **NafemanNathan** » Fri Jan 30, 2015 1:38 pm

4thgenphil wrote:
NafemanNathan wrote:I'm sure you've got a rank rod in your pants!
Not to dissimilar to the one deep deep inside of you!

Ha! Who are you kidding, you can't get "deep deep"!

Post by **4thgenphil** » Fri Jan 30, 2015 1:55 pm

I suppose you're right, you do have a mighty big booty

Post by **JEBB4** » Fri Jan 30, 2015 2:00 pm

Thats pretty much what I thought about 200-250..
Cheers, we are guna take the sump off on sunday and assess the damage before I say yay or nay..

Haha the smut on this forum sometimes

Post by **NafemanNathan** » Fri Jan 30, 2015 2:01 pm

4thgenphil wrote:I suppose you're right, you do have a mighty big booty

CrankmasterII · Post by **CrankmasterII** » Fri Jan 30, 2015 5:09 pm

I have a good crank from an A7 if needed