Lude Generation

Hi guys, I'm a bit stuck and not sure what to do. I brought my lude h22a8 4 weeks ago, when I brought her my head was bang on the head lining ( by a lot, I'm 6ft 6. ) I thought this would be a problem as I would just get lower seat rails like I did in my m3 and my Subaru.
Well once I found out that I could not get lower seat rails, I have tried every mod possible, had new seat springs, had the foam shaved and I still bang my head let alone get a helmet on.
This is my last ditch attempt to get some help. I love the lude, and I'm loving vtec, so I do not want to sale her so soon.
If you guys can help with any ideas that would be great.
Cheers I really don't want to sale her, if I have to though will look at atr. But would prefer to keep the lude.

Considered s2000 seats?

I have Bride low seat rails and it's really low compared to the stock seat position (around 2 inches).

I'm sure you can fabricator your own seat rails to make them low enough for your perfect position.

Im using S2000 seats on the S2000 seat pan instead of the Preludes. It sits 2 inchs lower. Much better.

Using evo 7 recaros and ive a good bit of.room now

Im 6ft and the standard seats were faaaar too high in my opinion

have you tried winding the seat down ???

Cheers guys, may look into s2000 seats. Fingers crossed

nitin_s1 wrote:I have Bride low seat rails and it's really low compared to the stock seat position (around 2 inches).

Do you now drive around with a periscope strapped to your head then?...

NafemanNathan wrote:

nitin_s1 wrote:I have Bride low seat rails and it's really low compared to the stock seat position (around 2 inches).

Do you now drive around with a periscope strapped to your head then?...

he actually does have you not seen the video he put up

I bought my BB4 off of a fairly short chap, he'd machined some spacers like you'd get on a 4x4 lift kit and used longer bolts to raise the seat rails by about an inch and a half