Project Z v1.0
Posted: Tue Feb 12, 2013 7:33 pm
I will start of by saying...I HAVE PICTURES 
Some of you will probably already know my car history, let's just say there have been a lot of ludes, a couple of ITR's, some civics and an S2K
I sold my s2k back in August last year as I needed the cash, so was car-less for a while and then this Type S came up and I snapped it up. There is some damage to the side which I will get repaired in due course.
Flew to Coventry and picked up the car from @Fluffsta but the car originally belonged to CRX-JIM on PUK.
Fluffsta kindly gave me a full Motegi kit and standard shocks and springs so I will only need one side skirt and probably selling the rest
The car has the following modifications:
Carbon Bonnet
Carbon Spoiler
Tein Basic Coilovers
Various I.C.E
17" Rays Engineering SS6 wheels
Aftermarket Exhaust
OBX Manifold
and all the usual Type S extras
My future plans are;
Valve clearances, along with a full service and replace the discs and pads.
Remove the carbon bonnet and spoiler, replace the bonnet and either spoiler-less or Type S spoiler.
Change the wheels to S2000 wheels.
Get the damage repaired and possibly have the whole car resprayed.
There is some misting in the front headlight, so will have a look at this at some point too.
Comments welcome
So here are the pics;
Some of you will probably already know my car history, let's just say there have been a lot of ludes, a couple of ITR's, some civics and an S2K
I sold my s2k back in August last year as I needed the cash, so was car-less for a while and then this Type S came up and I snapped it up. There is some damage to the side which I will get repaired in due course.
Flew to Coventry and picked up the car from @Fluffsta but the car originally belonged to CRX-JIM on PUK.
Fluffsta kindly gave me a full Motegi kit and standard shocks and springs so I will only need one side skirt and probably selling the rest
The car has the following modifications:
Carbon Bonnet
Carbon Spoiler
Tein Basic Coilovers
Various I.C.E
17" Rays Engineering SS6 wheels
Aftermarket Exhaust
OBX Manifold
and all the usual Type S extras
My future plans are;
Valve clearances, along with a full service and replace the discs and pads.
Remove the carbon bonnet and spoiler, replace the bonnet and either spoiler-less or Type S spoiler.
Change the wheels to S2000 wheels.
Get the damage repaired and possibly have the whole car resprayed.
There is some misting in the front headlight, so will have a look at this at some point too.
Comments welcome
So here are the pics;
