Page 1 of 1

5th Gen Air-con climate control evaporator thermistor urgent

Posted: Sun Jul 02, 2017 1:21 pm
by RattyMcClelland
So it seems ukdm cars use a thermostat in front of the evaporator housing under the dash. This is a 3 pin connection.

Jdm climate control uses a thermistor which is a 2 pin plug connector.

I need the thermistor off the housing.

It's easy to check, just look under the right side of the glove box and check the connection in the right of the large black box.

Can anyone help. Honda no longer stock it or make it.

Posted: Sun Jul 02, 2017 5:31 pm
by vanzep
the dash is out on the jdm 4th gen breaker with CC i have at the moment - so should be easy to get at if you think a 4th gen one is the same/compatible - long shot but :?

Posted: Sun Jul 02, 2017 9:54 pm
by RattyMcClelland
Here is the ukdm plug and thermostat.
Image
Image


This is the connection in my type S.
Image

Posted: Mon Jul 03, 2017 5:55 pm
by vanzep
@Rossco D[ can you check to see if the sensor in the breaker is 2pin or 3 pin (shown in rattys post above 2nd pic) Ta