5th Gen Air-con climate control evaporator thermistor urgent

Post by **RattyMcClelland** » Sun Jul 02, 2017 1:21 pm

So it seems ukdm cars use a thermostat in front of the evaporator housing under the dash. This is a 3 pin connection.

Jdm climate control uses a thermistor which is a 2 pin plug connector.

I need the thermistor off the housing.

It's easy to check, just look under the right side of the glove box and check the connection in the right of the large black box.

Can anyone help. Honda no longer stock it or make it.

Post by **vanzep** » Sun Jul 02, 2017 5:31 pm

the dash is out on the jdm 4th gen breaker with CC i have at the moment - so should be easy to get at if you think a 4th gen one is the same/compatible - long shot but

Post by **RattyMcClelland** » Sun Jul 02, 2017 9:54 pm

Here is the ukdm plug and thermostat.

This is the connection in my type S.

Post by **vanzep** » Mon Jul 03, 2017 5:55 pm

@Rossco D[ can you check to see if the sensor in the breaker is 2pin or 3 pin (shown in rattys post above 2nd pic) Ta